Gunpla Grades Explained and Which Kit to Buy First
You open a shop page, search for your favorite mobile suit, and get twelve results with letters like HG, RG, MG and PG in front of the same name, at prices ranging from about 800 yen to over 30,000.

You open a shop page, search for your favorite mobile suit, and get twelve results with letters like HG, RG, MG and PG in front of the same name, at prices ranging from about 800 yen to over 30,000. Pick the wrong one and you either end up bored by a kit that is too simple or stuck with 400 tiny parts and a weekend of frustration.
This guide explains the Gunpla grades in plain terms, what you get for the money at each level, and how I would choose a first kit after years of comparing listings on Japanese and Chinese platforms.
Gunpla grades at a glance
Gunpla is the short name for Gundam plastic model kits made by Bandai. The grade tells you the scale, the level of detail and roughly how hard the build will be. Prices below are typical Japanese retail for standard releases. Limited editions and exclusive colors cost more.
| Grade | Scale | Typical price | Build time | Best for |
|---|---|---|---|---|
| Entry Grade (EG) | 1/144 | 800 to 1,100 yen | 1 hour | Total beginners, kids, no tools |
| High Grade (HG) | 1/144 | 1,500 to 3,500 yen | 2 to 4 hours | First real kit, biggest range |
| Real Grade (RG) | 1/144 | 2,700 to 5,000 yen | 6 to 12 hours | Detail lovers with patience |
| Master Grade (MG) | 1/100 | 4,000 to 9,000 yen | 8 to 20 hours | Inner frame and display pieces |
| Perfect Grade (PG) | 1/60 | 15,000 to 40,000 yen | 30 hours and up | Experienced builders |
| Super Deformed (SD) | No fixed scale | 700 to 2,500 yen | 1 to 2 hours | Cute, chibi style displays |
If the scale numbers are new to you, our explainer on anime figure scales and which size to buy covers how 1/144 and 1/100 translate into real height on a shelf.
What changes between the grades
Entry Grade and High Grade
Entry Grade kits snap off the runner by hand, so you need no nippers. They look surprisingly good, but the range is small. High Grade is where most people live. An HG stands about 12 to 14 cm tall, uses color molded plastic so you do not need paint, and comes in hundreds of designs across every Gundam series. Newer HG kits, especially the Revive line, move much better than kits from the early 2000s.
Real Grade
Real Grade packs Master Grade style detail into the small 1/144 size. That means more parts, often 200 to 400, many of them under 5 mm. The finished model looks fantastic, with panel lines and multi color armor, but small pieces can loosen with handling. It is a display kit more than a kit for posing every day.
Master Grade and Perfect Grade
Master Grade kits stand around 18 cm tall and usually have a full inner frame that you build first, then cover with armor. Watching joints move under the plating is the main appeal. Perfect Grade is the flagship, roughly 30 cm or more, sometimes with lights. It needs serious desk space and serious time.
Which Gunpla grade to buy first
For nearly everyone, start with a recent High Grade. Check the release year on the listing and look for something from the last eight years, since engineering has improved a lot. A recent HG gives you clean color separation, good poses and a finished model in one evening.
Buy a basic tool kit at the same time:
- Single blade side cutters (nippers), 1,500 to 4,000 yen for a decent pair
- A hobby knife to clean leftover nub marks
- Fine sanding sticks around 400 to 1,000 grit
- A panel line marker, which makes even a simple kit look sharper
Avoid kitchen scissors. They crush the plastic and leave white stress marks that are hard to hide.
A simple first build routine
Cut each part from the runner in two steps. Make the first cut a few millimeters away from the piece, then a second cut close to the surface. This "double cut" keeps stress off the plastic and leaves a tiny nub you can shave flat with the knife. Work one runner section at a time, follow the manual numbers in order, and keep a small tray for loose parts. Most lost pieces are not lost in the box; they bounce off the desk.
Good light helps more than any expensive tool. A desk lamp at around 4,000 to 5,000 K color temperature shows white nub marks clearly on colored plastic. Give yourself a flat surface about the size of an open laptop, and do not rush the first kit into one sitting. Two evenings of 90 minutes each is a perfectly normal pace for a High Grade.
The advice I disagree with
A lot of forum posts say beginners should jump straight to Master Grade "because you will want it eventually anyway." I understand the logic. MG kits have clear manuals and very satisfying construction.
But I see the downside in shipping data and buyer complaints all the time. A first time builder pays 6,000 yen plus international shipping, opens a box with 20 runners, loses momentum halfway through the frame, and the kit sits unfinished for a year. Starting with a 2,000 yen HG costs a third as much, teaches you nub cleaning and part orientation in three hours, and leaves you finished and motivated. Master Grade should be your second or third kit, not your first.
Buying online without getting burned
Bandai kits are heavily copied. Some third party kits are honest original designs, but many listings on marketplace platforms are knockoffs of official molds with softer plastic, poor fit and incorrect colors. Here is how to tell what you are buying:
- Look for the Bandai or Bandai Spirits logo and the hologram sticker on the box photo.
- Compare the price with Japanese retail. A Master Grade listed at 1,500 yen equivalent is not real.
- Read store reviews that mention fit and plastic quality, not just delivery speed.
- Check box size and weight. Box volume drives shipping cost, and a large MG box can double the price you pay through a forwarder.
Our checklist on what makes an online fan merchandise retailer trustworthy applies directly here.
Frequently asked questions
What is the easiest Gunpla grade for beginners?
Entry Grade is the easiest because it needs no tools at all. For most beginners a recent High Grade is the better first choice, since it has a much bigger range and teaches basic skills in a few hours. Both are 1/144 scale and fit on a small shelf.
Is Real Grade harder than Master Grade?
Many builders find Real Grade fiddlier, because it fits similar detail into a smaller body with very small parts. Master Grade has more total pieces but larger, easier to handle ones. So RG tends to be harder on the fingers, MG harder on your schedule.
Do I need to paint Gunpla?
No. Modern kits are molded in color and look complete straight out of the box. Panel lining and a light matte top coat improve the look a lot without full painting.
More in Reviews
Reviews
Cosplay Wig Quality and How to Check One Before Buying
A reader sent me two photos of the same wig, taken ninety minutes apart.
Reviews
Taobao Seller Ratings and What the Numbers Really Mean
A buyer sent me two store links last month and asked which one to use.
Reviews
Weidian vs Taobao for Fan Merch and Which One to Use
Someone sends me a screenshot roughly twice a week with the same question attached.